PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24622-34
MS24622-34 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OR STEEL COMP 420 OVERALL, head_style: PAN, head_height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, fastener_length: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-133-1985, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24622-34
NSN: 5305-00-133-1985
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 410 OR STEEL COMP 420 OVERALL
head_stylePAN
head_height0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
fastener_length0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleDOG TYPE (TYPE B OR C)
nondefinitive_spec/std_dataB TYPE
departure_from_cited_designatorAS MODIFIED BY MAT
nonmachine_nominal_thread_diameter0.164 INCHES IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
NSN5305-00-133-1985
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24622-34 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: DOG TYPE (TYPE B OR C)
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD STYLE: PAN
•
MATERIAL: STEEL COMP 410 OR STEEL COMP 420 OVERALL
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY MAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEDOG TYPE (TYPE B OR C)
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD STYLEPAN
MATERIALSTEEL COMP 410 OR STEEL COMP 420 OVERALL
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY MAT
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NONDEFINITIVE SPEC/STD DATAB TYPE
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
FF-S-107CInterchangeable
interchangeable cross-reference
interchangeable
80X658Interchangeable
interchangeable cross-reference
interchangeable
143189Interchangeable
interchangeable cross-reference
interchangeable
FFS107TYPECSSTYLE6SInterchangeable
interchangeable cross-reference
interchangeable
172046Interchangeable
interchangeable cross-reference
interchangeable
FFS107Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24622-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24622-34?
MS24622-34 is a SCREW,TAPPING.
What parts can replace MS24622-34?
There are 18 known substitutes for MS24622-34: FF-S-107C, 80X658, 143189 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS24622-34?
MS24622-34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-133-1985. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24622-34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026