PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS107TYPECSSTYLE6S
FFS107TYPECSSTYLE6S ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: OVAL COUNTERSUNK, head_diameter: 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM OR ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-017-2046, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS107TYPECSSTYLE6S
NSN: 5305-00-017-2046
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleOVAL COUNTERSUNK
head_diameter0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
fastener_length0.750 INCHES NOMINAL IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM OR ZINC OVERALL
internal_drive_styleSLOT
nonmachine_thread_styleTHRU SLOT (TYPE D)
nonmachine_nominal_thread_diameter0.216 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5305-00-017-2046
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS107TYPECSSTYLE6S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
HEAD STYLE: OVAL COUNTERSUNK
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
INTERNAL DRIVE STYLE: SLOT
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.750 INCHES NOMINAL IN
HEAD STYLEOVAL COUNTERSUNK
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
INTERNAL DRIVE STYLESLOT
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NONMACHINE THREAD STYLETHRU SLOT (TYPE D)
HEAD DIAMETER0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
FF-S-107CInterchangeable
interchangeable cross-reference
interchangeable
80X658Interchangeable
interchangeable cross-reference
interchangeable
143189Interchangeable
interchangeable cross-reference
interchangeable
FFS107Interchangeable
interchangeable cross-reference
interchangeable
161818Interchangeable
interchangeable cross-reference
interchangeable
NASM51861-39CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS107TYPECSSTYLE6S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS107TYPECSSTYLE6S?
FFS107TYPECSSTYLE6S is a SCREW,TAPPING.
What parts can replace FFS107TYPECSSTYLE6S?
There are 20 known substitutes for FFS107TYPECSSTYLE6S: FF-S-107C, 80X658, 143189 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS107TYPECSSTYLE6S?
FFS107TYPECSSTYLE6S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-017-2046. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS107TYPECSSTYLE6S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026