PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS24615-52
MS24615-52 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, fastener_length: 1.250 INCHES NOMINAL IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, features_provided: CASEHARDENED, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-057-8472, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS24615-52
NSN: 5305-00-057-8472
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
fastener_length1.250 INCHES NOMINAL IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
features_providedCASEHARDENED
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.216 INCHES IN
material_document_and_classificationAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
NSN5305-00-057-8472
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS24615-52 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD DIAMETER: 0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
FEATURES PROVIDEDCASEHARDENED
HEAD DIAMETER0.410 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
FF-S-107 TYAInterchangeable
interchangeable cross-reference
interchangeable
FF-S-107Interchangeable
interchangeable cross-reference
interchangeable
FF-S-107C TYAInterchangeable
interchangeable cross-reference
interchangeable
079508Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS24615-52?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS24615-52?
MS24615-52 is a SCREW,TAPPING.
What parts can replace MS24615-52?
There are 4 known substitutes for MS24615-52: FF-S-107 TYA, FF-S-107, FF-S-107C TYA and 1 more. Substitute compatibility should be verified for your specific system.
Is MS24615-52 still available?
MS24615-52 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS24615-52

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026