PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 079508
079508 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, fastener_length: 3.000 INCHES NOMINAL IN, special_features: COLOR BLACK, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-229-7990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
079508
NSN: 5305-01-229-7990
FSC: 5305
CAGE: 63651 — MAGNUM INTERNATIONAL LTD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
fastener_length3.000 INCHES NOMINAL IN
special_featuresCOLOR BLACK
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
features_providedCASEHARDENED
surface_treatmentPHOSPHATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.164 INCHES IN
NSN5305-01-229-7990
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 079508 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCOLOR BLACK
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTPHOSPHATE OVERALL
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEFLAT COUNTERSUNK
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FF-S-107 TYAInterchangeable
interchangeable cross-reference
interchangeable
FF-S-107Interchangeable
interchangeable cross-reference
interchangeable
FF-S-107C TYAInterchangeable
interchangeable cross-reference
interchangeable
MS24615-52Interchangeable
interchangeable cross-reference
interchangeable
L-160141 ITEM 013Interchangeable
interchangeable cross-reference
interchangeable
079508Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 079508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 079508?
079508 is a SHAFT,STRAIGHT.
What parts can replace 079508?
There are 6 known substitutes for 079508: FF-S-107 TYA, FF-S-107, FF-S-107C TYA and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 079508?
079508 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-229-7990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 079508

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026