PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-107
FF-S-107 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1016 AND STEEL COMP 1019 AND STEEL COMP 1021 AND STEEL COMP 1022 AND STEEL COMP 1524 OVERALL, head_style: HEXAGON, head_height: 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN, pilot_length: 0.047 INCHES NOMINAL IN, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, pilot_diameter: 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-001-1948, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-107
NSN: 5305-00-001-1948
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL COMP 1016 AND STEEL COMP 1019 AND STEEL COMP 1021 AND STEEL COMP 1022 AND STEEL COMP 1524 OVERALL
head_styleHEXAGON
head_height0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
pilot_length0.047 INCHES NOMINAL IN
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
pilot_diameter0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM IN
fastener_length1.449 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
special_featuresRECOMMENDED HOLE SIZE 0.052;DRILL SIZE 55
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
features_providedCASEHARDENED
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-00-001-1948
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-107 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
NONDEFINITIVE SPEC/STD DATA: AB TYPE
•
MATERIAL: STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
•
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HEAD STYLE: HEXAGON
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FASTENER LENGTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
NONDEFINITIVE SPEC/STD DATAAB TYPE
MATERIALSTEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1524 OVERALL
WIDTH BETWEEN FLATS0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HEAD STYLEHEXAGON
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
INTERNAL DRIVE STYLESLOT
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
MS51850-24Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-107?
FF-S-107 is a SCREW,TAPPING.
What parts can replace FF-S-107?
There is 1 known substitute for FF-S-107: MS51850-24. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-107?
FF-S-107 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-001-1948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-107

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026