PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21919WH36
MS21919WH36 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, surface_treatment: CADMIUM BAND, material_thickness: 0.040 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1443, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21919WH36
NSN: 5340-00-054-1443
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
surface_treatmentCADMIUM BAND
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter2.250 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.818 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.600 INCHES NOMINAL IN
NSN5340-00-054-1443
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21919WH36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL: STEEL BAND
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.818 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOROFFSET MOUNT
MATERIALSTEEL BAND
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.818 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
LOOP INSIDE DIAMETER2.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.600 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21919WH36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919WH36?
MS21919WH36 is a CLAMP,LOOP.
What parts can replace MS21919WH36?
There are 22 known substitutes for MS21919WH36: MILC8603, 99122, MS21919G8 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21919WH36?
MS21919WH36 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1443. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21919WH36

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026