Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-298-9402, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS21919G11
NSN:5340-00-298-9402 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter
0.204 INCHES NOMINAL IN
material
STEEL COMP 1010 BAND
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CADMIUM BAND
material_thickness
0.032 INCHES NOMINAL IN
loop_inside_diameter
0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
nondefinitive_spec/std_data
4 TYPE AND B CLASS
cushioning_environmental_protection
WEATHER RESISTANT AND OZONE RESISTANT
material_document_and_classification
ASTM A109 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end
1.029 INCHES NOMINAL IN
NSN
5340-00-298-9402
COMPONENT DIAGRAM
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT AND OZONE RESISTANT
•
SURFACE TREATMENT: CADMIUM BAND
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND B CLASS
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.796 INCHES MINIMUM AND 0.826 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A109 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONING ENVIRONMENTAL PROTECTION
WEATHER RESISTANT AND OZONE RESISTANT
OVERALL WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
SURFACE TREATMENT
CADMIUM BAND
NONDEFINITIVE SPEC/STD DATA
4 TYPE AND B CLASS
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919G11?
MS21919G11 is a CLAMP,LOOP.
What parts can replace MS21919G11?
There are 21 known substitutes for MS21919G11: 5340PL1524825, MS21106-16, MIL-DTL-8603 and 18 more. Substitute compatibility should be verified for your specific system.
Is MS21919G11 still available?
MS21919G11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.