PartsTable
Technical Data Sheet
Download PDF

MS21919G8 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS21919G8: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-291-5342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21919G8
NSN: 5340-00-291-5342
FSC: 5340 — Hardware, Commercial
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.029 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
loop_inside_diameter0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
nondefinitive_spec/std_data4 TYPE AND B CLASS
distance_from_loop_center_to_tongue_end0.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.592 INCHES NOMINAL IN
NSN5340-00-291-5342
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21919G8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.780 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND B CLASS
•
SURFACE TREATMENT: CADMIUM BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.029 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.780 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA4 TYPE AND B CLASS
SURFACE TREATMENTCADMIUM BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.592 INCHES NOMINAL IN
MATERIALSTEEL BAND
SUBSTITUTES & CROSS-REFERENCES 6
MILC8603Reference document
Same NSN cross-reference
Reference document — Identification reference
99122Reference document
Same NSN cross-reference
Reference document — Secondary reference
362099Reference document
Same NSN cross-reference
Reference document — Secondary reference
69810-10CReference document
Same NSN cross-reference
Reference document — Secondary reference
5340002915342Reference document
Same NSN cross-reference
Reference document — Secondary reference
53402915342Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS21919G8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919G8?
MS21919G8 is a CLAMP,LOOP.
What parts can replace MS21919G8?
There are 6 known substitutes for MS21919G8: MILC8603, 99122, 362099 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21919G8?
MS21919G8 is cataloged in the U.S. Government catalog under NSN 5340-00-291-5342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21919G8