Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-140-4629, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS21919WDH10
NSN:5340-01-140-4629 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
diameter
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material
STEEL COMP 321 BAND
overall_width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
PASSIVATE BAND
material_thickness
0.032 INCHES NOMINAL IN
loop_inside_diameter
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
cushioning_environmental_protection
CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
material_document_and_classification
AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
0.998 INCHES NOMINAL IN
surface_treatment_document_and_classification
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN
5340-01-140-4629
COMPONENT DIAGRAM
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.765 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: RUBBER SILICONE CLASS Q CUSHION
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPE
ROUND, UNTHREADED
MATERIAL THICKNESS
0.032 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.765 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL
RUBBER SILICONE CLASS Q CUSHION
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
MATERIAL
STEEL COMP 321 BAND
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919WDH10?
MS21919WDH10 is a CLAMP,LOOP.
What parts can replace MS21919WDH10?
There are 25 known substitutes for MS21919WDH10: MILC8603, 99122, MS21919G8 and 22 more. Substitute compatibility should be verified for your specific system.
Is MS21919WDH10 still available?
MS21919WDH10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.