PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21919G14
MS21919G14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-9430, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21919G14
NSN: 5340-00-286-9430
FSC: 5340
CAGE: 86896 — SCHENUIT INDUSTRIES INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.0320 INCHES NOMINAL IN
loop_inside_diameter0.875 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.107 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.889 INCHES NOMINAL IN
NSN5340-00-286-9430
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21919G14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SPECIAL FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND B CLASS
•
SURFACE TREATMENT: CADMIUM BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY SPECIAL FEATURES
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
SPECIAL FEATURESWEDGE TYPE CUSHION CONSTRUCTION
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA4 TYPE AND B CLASS
SURFACE TREATMENTCADMIUM BAND
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.874 INCHES MINIMUM AND 0.904 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.107 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21919G14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919G14?
MS21919G14 is a CLAMP,LOOP.
What parts can replace MS21919G14?
There are 24 known substitutes for MS21919G14: MILC8603, 99122, MS21919G8 and 21 more. Substitute compatibility should be verified for your specific system.
Is MS21919G14 still available?
MS21919G14 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21919G14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026