PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS21919DF16
MS21919DF16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE NITRILE CUSHION, temp_rating: 212.0 FAHRENHEIT DEGF, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: COLOR SHALL BE SOLID YELLOW, style_designator: OFFSET MOUNT, material_diameter: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-467-0886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS21919DF16
NSN: 5340-01-467-0886
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER BUTADIENE NITRILE CUSHION
temp_rating212.0 FAHRENHEIT DEGF
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_featuresCOLOR SHALL BE SOLID YELLOW
style_designatorOFFSET MOUNT
material_diameter0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
specification/standard_data96906-MS21919 REV E GOVERNMENT STANDARD
cushioning_environmental_protectionFUEL RESISTANT AND OZONE RESISTANT
distance_from_loop_center_to_tongue_end1.188 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.955 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
NSN5340-01-467-0886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS21919DF16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 212.0 FAHRENHEIT DEGF
•
MATERIAL: ALUMINUM BAND
•
MATERIAL DIAMETER: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 96906-MS21919 REV E GOVERNMENT STANDARD
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING212.0 FAHRENHEIT DEGF
MATERIALALUMINUM BAND
MATERIAL DIAMETER0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA96906-MS21919 REV E GOVERNMENT STANDARD
MATERIALRUBBER BUTADIENE NITRILE CUSHION
STYLE DESIGNATOROFFSET MOUNT
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR SHALL BE SOLID YELLOW
LOOP INSIDE DIAMETER0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.955 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS21919DF16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21919DF16?
MS21919DF16 is a CLAMP,LOOP.
What parts can replace MS21919DF16?
There are 23 known substitutes for MS21919DF16: MILC8603, 99122, MS21919G8 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21919DF16?
MS21919DF16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-467-0886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS21919DF16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026