Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.032 INCHES NOMINAL IN, loop_inside_diameter: 0.312 INCHES NOMINAL IN, material_document_and_classification: 66 FED STD ALL MATERIAL RESPONSES BAND. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-057-2891, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS21333-4
NSN:5340-00-057-2891 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MATERIAL: STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.657 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES BAND
•
LOOP INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL
STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 BAND
DISTANCE FROM LOOP CENTER TO TONGUE END
0.657 INCHES NOMINAL IN
DIAMETER
0.203 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
66 FED STD ALL MATERIAL RESPONSES BAND
LOOP INSIDE DIAMETER
0.312 INCHES NOMINAL IN
MATERIAL THICKNESS
0.032 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
STYLE DESIGNATOR
SINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21333-4?
MS21333-4 is a CLAMP,LOOP.
What parts can replace MS21333-4?
There are 5 known substitutes for MS21333-4: MS21333-27, NASM21333, MS21333-10 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21333-4?
MS21333-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-057-2891. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.