Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM OR CHROMATE OR ZINC AND CHROMATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-912-8870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS21333-10
NSN:5340-00-912-8870 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.625 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.844 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR CHROMATE OR ZINC AND CHROMATE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
•
LOOP INSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.625 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.844 INCHES NOMINAL IN
SURFACE TREATMENT
CADMIUM OR CHROMATE OR ZINC AND CHROMATE BAND
TONGUE HOLE TYPE
ROUND, UNTHREADED
STYLE DESIGNATOR
SINGLE LOOP
MATERIAL
STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS21333-10?
MS21333-10 is a CLAMP,LOOP.
What parts can replace MS21333-10?
There are 20 known substitutes for MS21333-10: MS21333-15, NASM21333, CMDX2-1PT502740 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS21333-10?
MS21333-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-912-8870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.