Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.344 INCHES NOMINAL IN, slot_width: 0.438 INCHES NOMINAL IN, slot_length: 0.563 INCHES NOMINAL IN, overall_width: 0.562 INCHES NOMINAL IN, special_features: CUSHIONED PLASTISOL 032 IN THICH IN, style_designator: SINGLE LOOP. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-1468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
NASM21333
NSN:5340-00-034-1468 FSC:5340 CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter
0.344 INCHES NOMINAL IN
slot_width
0.438 INCHES NOMINAL IN
slot_length
0.563 INCHES NOMINAL IN
overall_width
0.562 INCHES NOMINAL IN
special_features
CUSHIONED PLASTISOL 032 IN THICH IN
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
material_diameter
0.30 INCHES NOMINAL IN
surface_treatment
CADMIUM OR ZINC OVERALL
material_thickness
0.032 INCHES NOMINAL IN
nominal_thread_size
0.312 INCHES IN
loop_inside_diameter
0.875 INCHES NOMINAL IN
NSN
5340-00-034-1468
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL: STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.906 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL
STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
DISTANCE FROM LOOP CENTER TO TONGUE END
1.125 INCHES NOMINAL IN
STYLE DESIGNATOR
SINGLE LOOP
DIAMETER
0.203 INCHES NOMINAL IN
MATERIAL THICKNESS
0.032 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NASM21333?
NASM21333 is a CLAMP,LOOP.
What parts can replace NASM21333?
There are 5 known substitutes for NASM21333: MS21333-27, NASM21333, MS21333-10 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for NASM21333?
NASM21333 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-1468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.