PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17131-5
MS17131-5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RING ALSO EXTRA CAPACITY OUTER RING, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-183-6715, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17131-5
NSN: 3110-00-183-6715
FSC: 3110
CAGE: 81346 — AMERICAN SOCIETY FOR TESTING AND MATERIALS DBA ASTM INTERNATIONAL (USA)
SPECIFICATIONS
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RING ALSO EXTRA CAPACITY OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.4375 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classificationAISI ASSN STD ALL MATERIAL RESPONSES OR 66 FED STD ALL MATERIAL RESPONSES INNER RING
NSN3110-00-183-6715
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17131-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OR 66 FED STD ALL MATERIAL RESPONSES OUTER RING
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE IN OUTER RING ALSO EXTRA CAPACITY OUTER RING
BORE DIAMETER0.2500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES OR 66 FED STD ALL MATERIAL RESPONSES OUTER RING
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER0.4375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES ROLLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
359950R91Interchangeable
interchangeable cross-reference
interchangeable
A24501-12Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
8130869Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
9090295Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17131-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17131-5?
MS17131-5 is a BEARING,ROLLER,NEEDLE.
What parts can replace MS17131-5?
There are 31 known substitutes for MS17131-5: 359950R91, A24501-12, MS17131 and 28 more. Substitute compatibility should be verified for your specific system.
Is MS17131-5 still available?
MS17131-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17131-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026