PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9090295
9090295 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 8615 LOADING GROOVE SIDE, bore_diameter: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, overall_width: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RING,EXTRA CAPACITY OUTER RING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-069-3305, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9090295
NSN: 3110-00-069-3305
FSC: 3110
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 8615 LOADING GROOVE SIDE
bore_diameter0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
overall_width0.5000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RING,EXTRA CAPACITY OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.5625 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-069-3305
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9090295 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1090 OR STEEL COMP 1095 ROLLER
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.5625 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SPECIAL FEATURESOIL HOLE IN OUTER RING,EXTRA CAPACITY OUTER RING
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5625 INCHES NOMINAL IN
SURFACE FINISHGROUND
BORE DIAMETER0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 8615 LOADING GROOVE SIDE
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
359950R91Interchangeable
interchangeable cross-reference
interchangeable
A24501-12Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
8130869Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
ASTM F 2162Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9090295?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9090295?
9090295 is a BEARING,ROLLER,NEEDLE.
What parts can replace 9090295?
There are 25 known substitutes for 9090295: 359950R91, A24501-12, MS17131 and 22 more. Substitute compatibility should be verified for your specific system.
Is 9090295 still available?
9090295 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9090295

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026