PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A24501-12
A24501-12 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1090 OR STEEL COMP 1095 ROLLER, bore_diameter: 1.7500 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: EXTRA CAPACITY OUTER RACE,OIL HOLE IN OUTER RACE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-056-9375, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A24501-12
NSN: 3110-00-056-9375
FSC: 3110
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
bore_diameter1.7500 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresEXTRA CAPACITY OUTER RACE,OIL HOLE IN OUTER RACE
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter2.1250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-056-9375
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A24501-12 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 8615 OUTER RING
•
BORE DIAMETER: 1.7500 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
MATERIALSTEEL COMP 1010 OR STEEL COMP 8615 OUTER RING
SPECIAL FEATURESEXTRA CAPACITY OUTER RACE,OIL HOLE IN OUTER RACE
BORE DIAMETER1.7500 INCHES NOMINAL IN
OVERALL WIDTH0.7500 INCHES NOMINAL IN
MATERIALSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER2.1250 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
4032-0001Interchangeable
interchangeable cross-reference
interchangeable
1-2153Interchangeable
interchangeable cross-reference
interchangeable
8130869Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
9090295Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A24501-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A24501-12?
A24501-12 is a BEARING,ROLLER,NEEDLE.
What parts can replace A24501-12?
There are 29 known substitutes for A24501-12: 4032-0001, 1-2153, 8130869 and 26 more. Substitute compatibility should be verified for your specific system.
Is A24501-12 still available?
A24501-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A24501-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026