PartsTable
Technical Data Sheet
PartsTable / O-RING / MS-28775-246
MS-28775-246 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, center_hole_diameter: 4.454 INCHES MINIMUM AND 4.514 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, criticality_code_justification: ADYT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-585-8249, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS-28775-246
NSN: 5331-00-585-8249
FSC: 5331 — O-RING
CAGE: A9271 — GORIZIANE GROUP SPA (ITA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
center_hole_diameter4.454 INCHES MINIMUM AND 4.514 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
criticality_code_justificationADYT
NSN5331-00-585-8249
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS-28775-246 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
300639Interchangeable
interchangeable cross-reference
interchangeable
200010Interchangeable
interchangeable cross-reference
interchangeable
6230-24Interchangeable
interchangeable cross-reference
interchangeable
AN6227-30Interchangeable
interchangeable cross-reference
interchangeable
701946Interchangeable
interchangeable cross-reference
interchangeable
2-246Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS-28775-246?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS-28775-246?
MS-28775-246 is a O-RING.
What parts can replace MS-28775-246?
There are 23 known substitutes for MS-28775-246: 300639, 200010, 6230-24 and 20 more. Substitute compatibility should be verified for your specific system.
Is MS-28775-246 still available?
MS-28775-246 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS-28775-246

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026