PartsTable / O-RING / 701946
701946
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include special_features: CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-585-8249, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
701946
NSN: 5331-00-585-8249 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
special_features CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200 NSN 5331-00-585-8249
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 701946
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• OUTSIDE DIAMETER: 4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OUTSIDE DIAMETER 4.724 INCHES MINIMUM AND 4.800 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN CENTER HOLE DIAMETER 4.469 INCHES MINIMUM AND 4.499 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
300639 Interchangeable interchangeable cross-reference
interchangeable
200010 Interchangeable interchangeable cross-reference
interchangeable
6230-24 Interchangeable interchangeable cross-reference
interchangeable
AN6227-30 Interchangeable interchangeable cross-reference
interchangeable
701946 Interchangeable interchangeable cross-reference
interchangeable
2-246 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 701946?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701946?
701946 is a PACKING,PREFORMED.
What parts can replace 701946?
There are 23 known substitutes for 701946: 300639, 200010, 6230-24 and 20 more. Substitute compatibility should be verified for your specific system.
Is 701946 still available?
701946 is currently cancelled.