PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN6227-30
AN6227-30 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GEAR ASSEMBLY,SPEED DECREASER is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.120 INCHES MINIMUM AND 2.170 INCHES MAXIMUM IN, center_hole_diameter: 1.710 INCHES MINIMUM AND 1.740 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-506-4011, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6227-30
NSN: 5330-00-506-4011
FSC: 5330
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter2.120 INCHES MINIMUM AND 2.170 INCHES MAXIMUM IN
center_hole_diameter1.710 INCHES MINIMUM AND 1.740 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5330-00-506-4011
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6227-30 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MS28775-327Interchangeable
interchangeable cross-reference
interchangeable
7377-327Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS28775Interchangeable
interchangeable cross-reference
interchangeable
MS28775-246Interchangeable
interchangeable cross-reference
interchangeable
SR 832-75-246Interchangeable
interchangeable cross-reference
interchangeable
2533405-246Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6227-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6227-30?
AN6227-30 is a GEAR ASSEMBLY,SPEED DECREASER.
What parts can replace AN6227-30?
There are 11 known substitutes for AN6227-30: MS28775-327, 7377-327, SAE-AS28775 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN6227-30?
AN6227-30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-506-4011. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6227-30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026