PartsTable
Technical Data Sheet

MIL-H-24136/3A — IMPELLER,PUMP,CENTRIFUGAL

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

MIL-H-24136/3A: IMPELLER,PUMP,CENTRIFUGAL.

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, leg_length: 3.060 INCHES NOMINAL FIRST END IN, flange_shape: ROUND SECOND END, connection_type: FLANGE SECOND END, flange_face_design: RAISED SWIVEL SECOND END, operating_pressure: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-504-7492, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-24136/3A
NSN: 4720-00-504-7492
NIINs: 005047492, 015031731
FSC: 4720 — Hose and Flexible Tubing
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
leg_length3.060 INCHES NOMINAL FIRST END IN
flange_shapeROUND SECOND END
connection_typeFLANGE SECOND END
special_featuresPRIOR TO INSTALLATION, ASSY SHALL BE VISUALLY INSPECTED AND HYDROSTATICALLY TESTED TO 700 PSI; USE STRONGBACKS ON THE FLANGE WHEN TESTING WITH HOSE ATTACHED; LOW PRESSURE APPLICATION
flange_face_designRAISED SWIVEL SECOND END
operating_pressure150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
end_item_identificationVALVES, ENGINE RM, STEAM PLANT, NSSN CLASS SUBMARINE
media_for_which_designedWATER, SALT SINGLE RESPONSE
part_name_assigned_by_controlling_agencyELBOW, 90, HOSE X FLG
nominal_inside_diameter_hose_accommodated1.835 INCHES SECOND END IN
nominal_outside_diameter_hose_accommodated2.220 INCHES SECOND END IN
NSN4720-00-504-7492
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-24136/3A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 6.500 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 1.080 INCHES NOMINAL IN
•
OPERATING PRESSURE: 550.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-24136/3 GOVERNMENT SPECIFICATION
•
NONDEFINITIVE SPEC/STD DATA: 12 SIZE
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS6.500 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER1.080 INCHES NOMINAL IN
OPERATING PRESSURE550.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81349-MIL-H-24136/3 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA12 SIZE
INSIDE DIAMETER0.620 INCHES NOMINAL IN
INSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 8
62580-12Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4720PL1448572Reference document
Same NSN cross-reference
Reference document — Informative reference only
MIL-H-24136/3Reference document
Same NSN cross-reference
Reference document — Secondary reference
4280-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-24136/3Reference document
Same NSN cross-reference
Reference document — Identification reference
M24136/3-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy MIL-H-24136/3A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-24136/3A?
MIL-H-24136/3A is a IMPELLER,PUMP,CENTRIFUGAL.
What parts can replace MIL-H-24136/3A?
There are 8 known substitutes for MIL-H-24136/3A: 62580-12, 4720PL1448572, MIL-H-24136/3 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-24136/3A?
MIL-H-24136/3A is cataloged in the U.S. Government catalog under NSN 4720-00-504-7492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-24136/3A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.