PartsTable
Technical Data Sheet

MIL-DTL-24136/3 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

MIL-DTL-24136/3: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: RUBBER TUBE, flow_angle: 90.0 DEGREES, leg_length: 3.060 INCHES NOMINAL FIRST END IN, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, flange_shape: ROUND WITH HOLES FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-177-1721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-24136/3
NSN: 4720-00-177-1721
NIINs: 001771721, 001874102, 001874279, 001874283, 001948911, 004231001, 005047492, 005746558, 011210873, 013526014, 013526015, 014397649, 015015068, 015015074, 015015468, 015015471, 015015589, 015017173, 015021538, 015031731, 015032872, 015032928, 015033205, 015042584, 015133050, 015681709, 015814037
FSC: 4720 — Hose and Flexible Tubing
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER TUBE
flow_angle90.0 DEGREES
leg_length3.060 INCHES NOMINAL FIRST END IN
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
flange_shapeROUND WITH HOLES FIRST END
flange_styleROUND W / BOLT HOLES FIRST END
connection_typeRAISED FACE FLANGE FIRST END
inside_diameter1.125 INCHES MINIMUM AND 1.469 INCHES MAXIMUM IN
connection_stylePLAIN (HOSE) SECOND END
outside_diameter0.750 INCHES NOMINAL IN
features_providedREUSABLE END FITTINGS
NSN4720-00-177-1721
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-DTL-24136/3 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 13.250 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 2.220 INCHES NOMINAL IN
•
OPERATING PRESSURE: 350.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
EXTERIOR COLOR: BLACK
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-24136/3 GOVERNMENT SPECIFICATION
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS13.250 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER2.220 INCHES NOMINAL IN
OPERATING PRESSURE350.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
EXTERIOR COLORBLACK
SPECIFICATION/STANDARD DATA81349-MIL-H-24136/3 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA32 SIZE
INSIDE DIAMETER1.810 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
2580-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
M24136/3-32Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-H-24136/3Reference document
Same NSN cross-reference
Reference document — Secondary reference
4720PL1361784Reference document
Same NSN cross-reference
Reference document — Informative reference only
4280-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy MIL-DTL-24136/3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-24136/3?
MIL-DTL-24136/3 is a CAPACITOR,FIXED,CERAMIC DIELECTR.
What parts can replace MIL-DTL-24136/3?
There are 5 known substitutes for MIL-DTL-24136/3: 2580-32, M24136/3-32, MIL-H-24136/3 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-24136/3?
MIL-DTL-24136/3 is cataloged in the U.S. Government catalog under NSN 4720-00-177-1721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-24136/3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.