PartsTable
Technical Data Sheet
Download PDF

62580-12 — IMPELLER,PUMP,CENTRIFUGAL

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

62580-12: IMPELLER,PUMP,CENTRIFUGAL.

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.620 INCHES NOMINAL IN, outside_diameter: 1.080 INCHES NOMINAL IN, operating_pressure: 550.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 2200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-504-7492, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
62580-12
NSN: 4720-00-504-7492
FSC: 4720 — Hose and Flexible Tubing
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.620 INCHES NOMINAL IN
outside_diameter1.080 INCHES NOMINAL IN
operating_pressure550.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure2200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
hydrostatic_test_pressure1100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data12 SIZE
specification/standard_data81349-MIL-H-24136/3 GOVERNMENT SPECIFICATION
NSN4720-00-504-7492
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 62580-12 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 6.500 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 1.080 INCHES NOMINAL IN
•
OPERATING PRESSURE: 550.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-24136/3 GOVERNMENT SPECIFICATION
•
NONDEFINITIVE SPEC/STD DATA: 12 SIZE
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS6.500 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER1.080 INCHES NOMINAL IN
OPERATING PRESSURE550.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81349-MIL-H-24136/3 GOVERNMENT SPECIFICATION
NONDEFINITIVE SPEC/STD DATA12 SIZE
INSIDE DIAMETER0.620 INCHES NOMINAL IN
INSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 8
4720PL1448572Reference document
Same NSN cross-reference
Reference document — Informative reference only
MIL-H-24136/3Reference document
Same NSN cross-reference
Reference document — Secondary reference
4280-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-H-24136/3AReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-24136/3Reference document
Same NSN cross-reference
Reference document — Identification reference
M24136/3-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 62580-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 62580-12?
62580-12 is a IMPELLER,PUMP,CENTRIFUGAL.
What parts can replace 62580-12?
There are 8 known substitutes for 62580-12: 4720PL1448572, MIL-H-24136/3, 4280-12 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 62580-12?
62580-12 is cataloged in the U.S. Government catalog under NSN 4720-00-504-7492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 62580-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.