M83461/1-021CP — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M83461/1-021CP: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, cross-sectional_height: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-335-8012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M83461/1-021CP

NSN: 5331-01-335-8012
FSC: 5331 — O-ring
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)

SPECIFICATIONS

material	RUBBER
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
cross-sectional_height	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
departure_from_cited_document	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification	ZZZW
material_document_and_classification	MIL-P-83461/1-021 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5331-01-335-8012

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

CRITICALITY CODE JUSTIFICATION: ZZZW

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-83461/1-021 MIL SPEC SINGLE MATERIAL RESPONSE

•

DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D

•

CENTER HOLE DIAMETER: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

MATERIAL: RUBBER

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATION	ZZZW
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-83461/1-021 MIL SPEC SINGLE MATERIAL RESPONSE
DEPARTURE FROM CITED DOCUMENT	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL	RUBBER

SUBSTITUTES & CROSS-REFERENCES 5

M83461/1-021Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-P-83461/1AReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-P-83461/1-021CPReference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS83461/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MIL-P-83461/1-021Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M83461/1-021CP?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M83461/1-021CP?

M83461/1-021CP is a O-RING.

What parts can replace M83461/1-021CP?

There are 5 known substitutes for M83461/1-021CP: M83461/1-021, AMS-P-83461/1A, MIL-P-83461/1-021CP and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M83461/1-021CP?

M83461/1-021CP is cataloged in the U.S. Government catalog under NSN 5331-01-335-8012. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M83461/1-021CP — O-RING

Request a Quote — M83461/1-021CP