M83461/1-021 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M83461/1-021: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, cross-sectional_height: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-107-1149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M83461/1-021

NSN: 5331-01-107-1149
NIINs: 011071149, 012253520, 013358012
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
cross-sectional_height	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
departure_from_cited_document	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification	ZZZW
material_document_and_classification	MIL-P-83461/1-021 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5331-01-107-1149

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.066 INCHES NOMINAL IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.066 INCHES NOMINAL IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 6

AMS-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

8900630P24Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

45122=23Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10331328Reference document

Same NSN cross-reference

Reference document — Informative reference only

SAE-AS83461/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy M83461/1-021?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M83461/1-021?

M83461/1-021 is a O-RING.

What parts can replace M83461/1-021?

There are 6 known substitutes for M83461/1-021: AMS-P-83461/1, MIL-P-83461/1, 8900630P24 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M83461/1-021?

M83461/1-021 is cataloged in the U.S. Government catalog under NSN 5331-01-107-1149. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M83461/1-021 — O-RING

Request a Quote — M83461/1-021