AMS-P-83461/1A — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AMS-P-83461/1A: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 7.939 INCHES MINIMUM AND 8.029 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: W/S: ARLEIGH BURKE CLASS DDG; HX UNIQUE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-335-8012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AMS-P-83461/1A

NSN: 5331-01-335-8012
NIINs: 013358012, 014746304
FSC: 5331 — O-ring
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter	7.939 INCHES MINIMUM AND 8.029 INCHES MAXIMUM IN
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identification	W/S: ARLEIGH BURKE CLASS DDG; HX UNIQUE
specification/standard_data	81349-MIL-P-83461-1B GOVERNMENT SPECIFICATION
NSN	5331-01-335-8012

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

CRITICALITY CODE JUSTIFICATION: ZZZW

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-83461/1-021 MIL SPEC SINGLE MATERIAL RESPONSE

•

DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D

•

CENTER HOLE DIAMETER: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

MATERIAL: RUBBER

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATION	ZZZW
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-83461/1-021 MIL SPEC SINGLE MATERIAL RESPONSE
DEPARTURE FROM CITED DOCUMENT	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL	RUBBER

SUBSTITUTES & CROSS-REFERENCES 5

M83461/1-021Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83461/1-021CPSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-P-83461/1-021CPReference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS83461/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MIL-P-83461/1-021Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AMS-P-83461/1A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AMS-P-83461/1A?

AMS-P-83461/1A is a O-RING.

What parts can replace AMS-P-83461/1A?

There are 5 known substitutes for AMS-P-83461/1A: M83461/1-021, M83461/1-021CP, MIL-P-83461/1-021CP and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AMS-P-83461/1A?

AMS-P-83461/1A is cataloged in the U.S. Government catalog under NSN 5331-01-335-8012. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AMS-P-83461/1A — O-RING

Request a Quote — AMS-P-83461/1A