PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-130CP
M83248/1-130CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/1-130CP is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-043-3462, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-130CP
NSN: 5331-01-043-3462
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83248/1-130CP
NSN5331-01-043-3462
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-130CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 1.818 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER1.818 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
CRITICALITY CODE JUSTIFICATIONZZZW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
M 83248/1-130Interchangeable
interchangeable cross-reference
interchangeable
284732-0001 ITEM 65Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-248Interchangeable
interchangeable cross-reference
interchangeable
AMS3216TY2CL1Interchangeable
interchangeable cross-reference
interchangeable
AMS3216Interchangeable
interchangeable cross-reference
interchangeable
MS27169-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-130CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-130CP?
M83248/1-130CP is a M83248/1-130CP.
What parts can replace M83248/1-130CP?
There are 25 known substitutes for M83248/1-130CP: M 83248/1-130, 284732-0001 ITEM 65, M83248/1-248 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/1-130CP?
M83248/1-130CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-043-3462. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-130CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026