The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN, length: 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN, overall_height: 0.900 INCHES MINIMUM AND 0.904 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-00-425-1380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M24066/4-115
NSN:5340-00-425-1380 FSC:5340 — Hardware, Commercial CAGE:80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
width
1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
length
0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
overall_height
0.900 INCHES MINIMUM AND 0.904 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
loop/holding_dimension
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.470 INCHES MINIMUM IN
material_document_and_classification
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-425-1380
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.470 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.900 INCHES MINIMUM AND 0.904 INCHES MAXIMUM IN
LENGTH
0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24066/4-115?
M24066/4-115 is a CLIP,SPRING TENSION.
What parts can replace M24066/4-115?
There are 2 known substitutes for M24066/4-115: MILC24066-4, NASM24066/4. Substitute compatibility should be verified for your specific system.
What is the NSN for M24066/4-115?
M24066/4-115 is cataloged in the U.S. Government catalog under NSN 5340-00-425-1380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.