PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LS7357DT11
LS7357DT11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: NATURAL COLOR W/RED STRIPE, style_designator: OFFSET MOUNT, material_thickness: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-040-9201, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LS7357DT11
NSN: 5340-00-040-9201
FSC: 5340
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresNATURAL COLOR W/RED STRIPE
style_designatorOFFSET MOUNT
material_thickness0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
loop_inside_diameter0.688 INCHES NOMINAL IN
material_document_and_classificationL-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end1.017 INCHES MINIMUM AND 1.047 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.814 INCHES NOMINAL IN
NSN5340-00-040-9201
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LS7357DT11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL: PLASTIC CUSHION
•
MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.814 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION
MATERIALPLASTIC CUSHION
MATERIAL THICKNESS0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
SPECIAL FEATURESNATURAL COLOR W/RED STRIPE
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.814 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIALALUMINUM ALLOY 2024 BAND
DIAMETER0.204 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
NAS1715CT32SWHUpgraded Successor
successor cross-reference
successor
NAS1715Upgraded Successor
successor cross-reference
successor
MS21122-11Interchangeable
Same NIIN cross-reference
interchangeable
82626-11Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy LS7357DT11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS7357DT11?
LS7357DT11 is a CLAMP,LOOP.
What parts can replace LS7357DT11?
There are 4 known substitutes for LS7357DT11: NAS1715CT32SWH, NAS1715, MS21122-11 and 1 more. Substitute compatibility should be verified for your specific system.
Is LS7357DT11 still available?
LS7357DT11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS7357DT11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026