PartsTable / COMPONENT / 82626-11
82626-11
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: NATURAL COLOR W/RED STRIPE, style_designator: OFFSET MOUNT, material_thickness: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-040-9201, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
82626-11
NSN: 5340-00-040-9201 FSC: 5340 CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
diameter 0.204 INCHES NOMINAL IN material PLASTIC CUSHION overall_width 0.500 INCHES NOMINAL IN special_features NATURAL COLOR W/RED STRIPE style_designator OFFSET MOUNT material_thickness 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN loop_inside_diameter 0.688 INCHES NOMINAL IN material_document_and_classification L-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION distance_from_loop_center_to_tongue_end 1.017 INCHES MINIMUM AND 1.047 INCHES MAXIMUM IN center_to_center_distance_between_loop_and_mounting_hole 0.814 INCHES NOMINAL IN NSN 5340-00-040-9201
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 82626-11
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL DOCUMENT AND CLASSIFICATION: L-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION
• MATERIAL: PLASTIC CUSHION
• MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.814 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION L-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION MATERIAL PLASTIC CUSHION MATERIAL THICKNESS 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN OVERALL WIDTH 0.500 INCHES NOMINAL IN SPECIAL FEATURES NATURAL COLOR W/RED STRIPE CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.814 INCHES NOMINAL IN MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND MATERIAL ALUMINUM ALLOY 2024 BAND DIAMETER 0.204 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
NAS1715 Upgraded Successor successor cross-reference
successor
MS21122-11 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 82626-11?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82626-11?
82626-11 is a CLAMP,LOOP.
What parts can replace 82626-11?
There are 3 known substitutes for 82626-11: NAS1715CT32SWH, NAS1715, MS21122-11. Substitute compatibility should be verified for your specific system.
Is 82626-11 still available?
82626-11 is currently cancelled.
Request a Quote — 82626-11