PartsTable
Technical Data Sheet
PartsTable / COMPONENT / NAS1715
NAS1715 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.265 INCHES NOMINAL IN, material: STEEL COMP 304 OR STEEL COMP 321 OR STEEL COMP 302 BAND, lug_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, temp_rating: -80.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 0.490 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-0537, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NAS1715
NSN: 5340-00-005-0537
FSC: 5340
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
diameter0.265 INCHES NOMINAL IN
materialSTEEL COMP 304 OR STEEL COMP 321 OR STEEL COMP 302 BAND
lug_width0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
temp_rating-80.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
overall_width0.500 INCHES NOMINAL IN
overall_length0.490 INCHES NOMINAL IN
inside_diameter1.750 INCHES NOMINAL IN
special_featuresMOUNTING HOLE DIAMETER 0.265 INCHES IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
material_diameter0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
NSN5340-00-005-0537
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: NAS1715 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
CUSHIONING ENVIRONMENTAL PROTECTION: WEATHER RESISTANT
•
DIAMETER: 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.814 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.027 INCHES MINIMUM AND 1.037 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
CUSHIONING ENVIRONMENTAL PROTECTIONWEATHER RESISTANT
MATERIALALUMINUM ALLOY 2024 BAND
DIAMETER0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.814 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.027 INCHES MINIMUM AND 1.037 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.812 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4041 ASSN STD SINGLE MATERIAL RESPONSE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
NAS1715CT32SWHUpgraded Successor
successor cross-reference
successor
NAS1715Upgraded Successor
successor cross-reference
successor
MS9352-10Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy NAS1715?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is NAS1715?
NAS1715 is a CLAMP,LOOP.
What parts can replace NAS1715?
There are 3 known substitutes for NAS1715: NAS1715CT32SWH, NAS1715, MS9352-10. Substitute compatibility should be verified for your specific system.
What is the NSN for NAS1715?
NAS1715 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-005-0537. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — NAS1715

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026