JM44LC90SS19PB — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC90SS19PB: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 302 OR STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-416-4367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC90SS19PB

NSN: 5340-01-416-4367
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	STEEL COMP 302 OR STEEL COMP 321 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.051 INCHES NOMINAL IN
loop_inside_diameter	1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
specification/standard_data	80205-NAS1715 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
environmental_attribute_code	ASBESTOS ALTERNATIVE PRODUCTS
material_document_and_classification	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.387 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
NSN	5340-01-416-4367

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.387 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN

•

SPECIFICATION/STANDARD DATA: 80205-NAS1715 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SURFACE TREATMENT: PASSIVATE BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.387 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA	80205-NAS1715 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT	PASSIVATE BAND
ENVIRONMENTAL ATTRIBUTE CODE	ASBESTOS ALTERNATIVE PRODUCTS
TONGUE HOLE TYPE	ROUND, UNTHREADED

SUBSTITUTES & CROSS-REFERENCES 4

S656SS19Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

11437SS19PBSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

9M983C19Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

NAS1715Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JM44LC90SS19PB?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC90SS19PB?

JM44LC90SS19PB is a CLAMP,LOOP.

What parts can replace JM44LC90SS19PB?

There are 4 known substitutes for JM44LC90SS19PB: S656SS19, 11437SS19PB, 9M983C19 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC90SS19PB?

JM44LC90SS19PB is cataloged in the U.S. Government catalog under NSN 5340-01-416-4367. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC90SS19PB — CLAMP,LOOP

Request a Quote — JM44LC90SS19PB