The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 302 OR STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-416-4367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11437SS19PB
NSN:5340-01-416-4367 FSC:5340 — Hardware, Commercial CAGE:83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
diameter
0.204 INCHES NOMINAL IN
material
STEEL COMP 302 OR STEEL COMP 321 BAND
overall_width
0.500 INCHES NOMINAL IN
style_designator
OFFSET MOUNT
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
PASSIVATE BAND
material_thickness
0.051 INCHES NOMINAL IN
loop_inside_diameter
1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
specification/standard_data
80205-NAS1715 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
environmental_attribute_code
ASBESTOS ALTERNATIVE PRODUCTS
material_document_and_classification
MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end
1.387 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
NSN
5340-01-416-4367
COMPONENT DIAGRAM
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.387 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 80205-NAS1715 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SURFACE TREATMENT: PASSIVATE BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR
OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND
DIAMETER
0.204 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
MATERIAL THICKNESS
0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.387 INCHES MINIMUM AND 1.417 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA
80205-NAS1715 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11437SS19PB?
11437SS19PB is a CLAMP,LOOP.
What parts can replace 11437SS19PB?
There are 4 known substitutes for 11437SS19PB: S656SS19, 9M983C19, JM44LC90SS19PB and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11437SS19PB?
11437SS19PB is cataloged in the U.S. Government catalog under NSN 5340-01-416-4367. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.