PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HHP96TYPE1
HHP96TYPE1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PAPER,GASKET is a the manufacturer industrial component. Key specifications include width: 36.000 INCHES NOMINAL IN, length: 900.000 INCHES NOMINAL IN, material: PAPER LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.062 INCHES NOMINAL IN, fiber_type: PLANT, environmental_protection: GASOLINE AND OIL RESISTANT AND WATER RESISTANT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-8466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HHP96TYPE1
NSN: 5330-00-270-8466
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width36.000 INCHES NOMINAL IN
length900.000 INCHES NOMINAL IN
materialPAPER LOCATION NOT OTHERWISE SPECIFIED
thickness0.062 INCHES NOMINAL IN
fiber_typePLANT
environmental_protectionGASOLINE AND OIL RESISTANT AND WATER RESISTANT
nondefinitive_spec/std_data1 TYPE
departure_from_cited_designatorAS MOD BY GASOLINE,OIL AND WATER RES
material_document_and_classificationMIL-G-12803,NO. F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5330-00-270-8466
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HHP96TYPE1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
•
THICKNESS: 0.005 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
•
FIBER TYPE: PLANT
•
ENVIRONMENTAL PROTECTION: OIL RESISTANT AND GASOLINE AND WATER RESISTANT
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
NONDEFINITIVE SPEC/STD DATA: I TYPE
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
THICKNESS0.005 INCHES MINIMUM AND 0.008 INCHES MAXIMUM IN
MATERIALPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
FIBER TYPEPLANT
ENVIRONMENTAL PROTECTIONOIL RESISTANT AND GASOLINE AND WATER RESISTANT
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NONDEFINITIVE SPEC/STD DATAI TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
60-306 PIECE 537Interchangeable
interchangeable cross-reference
interchangeable
HHP96-1-64INInterchangeable
interchangeable cross-reference
interchangeable
17-584Interchangeable
interchangeable cross-reference
interchangeable
MIL-G-12803 TYP E 1 1/32IN THKInterchangeable
interchangeable cross-reference
interchangeable
N-100412 PIECE 74Interchangeable
interchangeable cross-reference
interchangeable
RGR686BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HHP96TYPE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HHP96TYPE1?
HHP96TYPE1 is a PAPER,GASKET.
What parts can replace HHP96TYPE1?
There are 23 known substitutes for HHP96TYPE1: 60-306 PIECE 537, HHP96-1-64IN, 17-584 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HHP96TYPE1?
HHP96TYPE1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-8466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HHP96TYPE1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026