PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HHP96-1-64IN
HHP96-1-64IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PAPER,GASKET is a the manufacturer industrial component. Key specifications include width: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN, length: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN, material: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.016 INCHES NOMINAL IN, fiber_type: ANIMAL OR PLANT, environmental_protection: GASOLINE OR OIL RESISTANT AND WATER RESISTANT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-8468, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HHP96-1-64IN
NSN: 5330-00-270-8468
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
length36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
materialPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
thickness0.016 INCHES NOMINAL IN
fiber_typeANIMAL OR PLANT
environmental_protectionGASOLINE OR OIL RESISTANT AND WATER RESISTANT
nondefinitive_spec/std_data1 TYPE
material_document_and_classificationHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5330-00-270-8468
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HHP96-1-64IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
•
THICKNESS: 0.016 INCHES NOMINAL IN
•
FIBER TYPE: ANIMAL OR PLANT
•
ENVIRONMENTAL PROTECTION: GASOLINE OR OIL RESISTANT AND WATER RESISTANT
•
MATERIAL: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
WIDTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
THICKNESS0.016 INCHES NOMINAL IN
FIBER TYPEANIMAL OR PLANT
ENVIRONMENTAL PROTECTIONGASOLINE OR OIL RESISTANT AND WATER RESISTANT
MATERIALPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
NONDEFINITIVE SPEC/STD DATA1 TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
WIDTH36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
20664Interchangeable
interchangeable cross-reference
interchangeable
1ACL13Interchangeable
interchangeable cross-reference
interchangeable
102931Interchangeable
interchangeable cross-reference
interchangeable
6191-24VDCInterchangeable
interchangeable cross-reference
interchangeable
1-2670Interchangeable
interchangeable cross-reference
interchangeable
12668Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy HHP96-1-64IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HHP96-1-64IN?
HHP96-1-64IN is a PAPER,GASKET.
What parts can replace HHP96-1-64IN?
There are 29 known substitutes for HHP96-1-64IN: 20664, 1ACL13, 102931 and 26 more. Substitute compatibility should be verified for your specific system.
Is HHP96-1-64IN still available?
HHP96-1-64IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HHP96-1-64IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026