PartsTable / MRO / 17-584
17-584
✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The FILTER ASSEMBLY,ELECTRICAL is a the manufacturer industrial component. Key specifications include width: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN, length: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN, material: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.016 INCHES NOMINAL IN, fiber_type: ANIMAL OR PLANT, special_features: ONE LARGE HOLE AND FOUR SMALL HOLES. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-8468, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
17-584
NSN: 5330-00-270-8468 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN length 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN material PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED thickness 0.016 INCHES NOMINAL IN fiber_type ANIMAL OR PLANT special_features ONE LARGE HOLE AND FOUR SMALL HOLES end_item_identification 2320-01-346-9317 environmental_protection GASOLINE OR OIL RESISTANT AND WATER RESISTANT nondefinitive_spec/std_data 1 TYPE material_document_and_classification HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED NSN 5330-00-270-8468
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 17-584
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• LENGTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
• THICKNESS: 0.016 INCHES NOMINAL IN
• FIBER TYPE: ANIMAL OR PLANT
• ENVIRONMENTAL PROTECTION: GASOLINE OR OIL RESISTANT AND WATER RESISTANT
• MATERIAL: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
• NONDEFINITIVE SPEC/STD DATA: 1 TYPE
• MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
• WIDTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN THICKNESS 0.016 INCHES NOMINAL IN FIBER TYPE ANIMAL OR PLANT ENVIRONMENTAL PROTECTION GASOLINE OR OIL RESISTANT AND WATER RESISTANT MATERIAL PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED NONDEFINITIVE SPEC/STD DATA 1 TYPE MATERIAL DOCUMENT AND CLASSIFICATION HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED WIDTH 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
20664 Interchangeable interchangeable cross-reference
interchangeable
1ACL13 Interchangeable interchangeable cross-reference
interchangeable
102931 Interchangeable interchangeable cross-reference
interchangeable
6191-24VDC Interchangeable interchangeable cross-reference
interchangeable
1-2670 Interchangeable interchangeable cross-reference
interchangeable
12668 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 17-584?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17-584?
17-584 is a FILTER ASSEMBLY,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 17-584?
There are 29 known substitutes for 17-584: 20664, 1ACL13, 102931 and 26 more. Substitute compatibility should be verified for your specific system.
Is 17-584 still available?
17-584 is currently cancelled.