PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HHP0096TYPE1
HHP0096TYPE1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PAPER,GASKET is a the manufacturer industrial component. Key specifications include width: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN, length: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN, material: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED, thickness: 0.250 INCHES NOMINAL IN, fiber_type: ANIMAL OR PLANT, environmental_protection: GASOLINE AND OIL RESISTANT AND WATER RESISTANT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-8475, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HHP0096TYPE1
NSN: 5330-00-270-8475
FSC: 5330
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
width36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
length36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
materialPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
thickness0.250 INCHES NOMINAL IN
fiber_typeANIMAL OR PLANT
environmental_protectionGASOLINE AND OIL RESISTANT AND WATER RESISTANT
nondefinitive_spec/std_data1 TYPE
material_document_and_classificationHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5330-00-270-8475
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HHP0096TYPE1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
•
ENVIRONMENTAL PROTECTION: GASOLINE AND OIL RESISTANT AND WATER RESISTANT
•
FIBER TYPE: ANIMAL OR PLANT
•
THICKNESS: 0.250 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
WIDTH: 36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
ENVIRONMENTAL PROTECTIONGASOLINE AND OIL RESISTANT AND WATER RESISTANT
FIBER TYPEANIMAL OR PLANT
THICKNESS0.250 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN LOCATION NOT OTHERWISE SPECIFIED
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NONDEFINITIVE SPEC/STD DATA1 TYPE
WIDTH36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
60-306 PIECE 537Interchangeable
interchangeable cross-reference
interchangeable
HHP96-1-64INInterchangeable
interchangeable cross-reference
interchangeable
17-584Interchangeable
interchangeable cross-reference
interchangeable
F104Interchangeable
interchangeable cross-reference
interchangeable
HH-P-0096 TY1CLAInterchangeable
interchangeable cross-reference
interchangeable
F104-03/F326128M6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HHP0096TYPE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HHP0096TYPE1?
HHP0096TYPE1 is a PAPER,GASKET.
What parts can replace HHP0096TYPE1?
There are 16 known substitutes for HHP0096TYPE1: 60-306 PIECE 537, HHP96-1-64IN, 17-584 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HHP0096TYPE1?
HHP0096TYPE1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-8475. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HHP0096TYPE1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026