PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS92ANDTYPE1ANDSTYLE2
FFS92ANDTYPE1ANDSTYLE2 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_height: 0.023 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.462 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.750 INCHES NOMINAL IN, fastener_length: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-4027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE1ANDSTYLE2
NSN: 5305-00-144-4027
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_height0.023 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.462 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 85.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-144-4027
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE1ANDSTYLE2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
INTERNAL DRIVE STYLE: SLOT
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
HEAD DIAMETER: 0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD LENGTH0.270 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
INTERNAL DRIVE STYLESLOT
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
HEAD DIAMETER0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
HEAD STYLEFLAT COUNTERSUNK
SCREW SURFACE TREATMENTCADMIUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AN505-3-4Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1ANDSTYLE2Interchangeable
interchangeable cross-reference
interchangeable
8051Interchangeable
interchangeable cross-reference
interchangeable
AN510DD6-24Interchangeable
interchangeable cross-reference
interchangeable
AN510C10-7Interchangeable
interchangeable cross-reference
interchangeable
AN510-1-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS92ANDTYPE1ANDSTYLE2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE1ANDSTYLE2?
FFS92ANDTYPE1ANDSTYLE2 is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE1ANDSTYLE2?
There are 14 known substitutes for FFS92ANDTYPE1ANDSTYLE2: AN505-3-4, FFS92ANDTYPE1ANDSTYLE2, 8051 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE1ANDSTYLE2?
FFS92ANDTYPE1ANDSTYLE2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-4027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE1ANDSTYLE2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026