PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN510C10-7
AN510C10-7 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.290 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-1676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN510C10-7
NSN: 5305-00-151-1676
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.290 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
NSN5305-00-151-1676
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN510C10-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD CLASS: 2A A
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
HEAD STYLEFLAT COUNTERSUNK
THREAD CLASS2A A
INTERNAL DRIVE STYLESLOT
THREAD SERIES DESIGNATORUNF
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
FFS92ANDTYPE1ANDSTYLE2Interchangeable
interchangeable cross-reference
interchangeable
AN505-3-5Interchangeable
interchangeable cross-reference
interchangeable
AN505-3-4Interchangeable
interchangeable cross-reference
interchangeable
8051Interchangeable
interchangeable cross-reference
interchangeable
AN510DD6-24Interchangeable
interchangeable cross-reference
interchangeable
AN510-1-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN510C10-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN510C10-7?
AN510C10-7 is a SCREW,MACHINE.
What parts can replace AN510C10-7?
There are 13 known substitutes for AN510C10-7: FFS92ANDTYPE1ANDSTYLE2, AN505-3-5, AN505-3-4 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN510C10-7?
AN510C10-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-1676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN510C10-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026