PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN510-1-3
AN510-1-3 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN, thread_length: 0.188 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010, fastener_length: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-2259, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN510-1-3
NSN: 5305-00-151-2259
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
thread_length0.188 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.073 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-151-2259
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN510-1-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SCREW SURFACE TREATMENT: CADMIUM
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD DIAMETER: 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.073 INCHES IN
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 2A A
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW SURFACE TREATMENTCADMIUM
THREAD DIRECTIONRIGHT-HAND
HEAD DIAMETER0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.073 INCHES IN
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SCREW MATERIALSTEEL OR STEEL COMP 1010
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
FFS92ANDTYPE1ANDSTYLE2Interchangeable
interchangeable cross-reference
interchangeable
AN505-3-5Interchangeable
interchangeable cross-reference
interchangeable
AN505-3-4Interchangeable
interchangeable cross-reference
interchangeable
8051Interchangeable
interchangeable cross-reference
interchangeable
AN510DD6-24Interchangeable
interchangeable cross-reference
interchangeable
AN510C10-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN510-1-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN510-1-3?
AN510-1-3 is a SCREW,MACHINE.
What parts can replace AN510-1-3?
There are 13 known substitutes for AN510-1-3: FFS92ANDTYPE1ANDSTYLE2, AN505-3-5, AN505-3-4 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN510-1-3?
AN510-1-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-2259. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN510-1-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026