PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS107TYPEASTYLE1S
FFS107TYPEASTYLE1S ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: ROUND, head_height: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, spline_width: 0.050 INCHES NOMINAL IN, head_diameter: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN, fastener_length: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-3189, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS107TYPEASTYLE1S
NSN: 5305-00-014-3189
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleROUND
head_height0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
spline_width0.050 INCHES NOMINAL IN
head_diameter0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
fastener_length0.375 INCHES NOMINAL IN
features_providedCASEHARDENED
surface_treatmentCADMIUM OVERALL
internal_drive_styleSLOT
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_dataA TYPE AND 1S STYLE
nonmachine_nominal_thread_diameter0.168 INCHES IN
NSN5305-00-014-3189
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS107TYPEASTYLE1S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: ROUND
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD HEIGHT: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81348-FF-S-107 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEROUND
NONMACHINE NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD HEIGHT0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
HEAD DIAMETER0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
TEST DATA DOCUMENT81348-FF-S-107 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
FEATURES PROVIDEDCASEHARDENED
INTERNAL DRIVE STYLESLOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
FFS107TYPEASTYLE1SInterchangeable
interchangeable cross-reference
interchangeable
144701Interchangeable
interchangeable cross-reference
interchangeable
FF-S-107 TYPE ABInterchangeable
interchangeable cross-reference
interchangeable
148595Interchangeable
interchangeable cross-reference
interchangeable
32866S2Interchangeable
interchangeable cross-reference
interchangeable
FF-S-107CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS107TYPEASTYLE1S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS107TYPEASTYLE1S?
FFS107TYPEASTYLE1S is a SCREW,TAPPING.
What parts can replace FFS107TYPEASTYLE1S?
There are 21 known substitutes for FFS107TYPEASTYLE1S: FFS107TYPEASTYLE1S, 144701, FF-S-107 TYPE AB and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS107TYPEASTYLE1S?
FFS107TYPEASTYLE1S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-3189. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS107TYPEASTYLE1S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026