PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-P-395/8
FF-P-395/8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FF-P-395/8 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-823-8712, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-P-395/8
NSN: 5315-00-823-8712
FSC: 5315
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
Part NumberFF-P-395/8
NSN5315-00-823-8712
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FF-P-395/8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK LENGTH: 1.188 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL FOR WHICH DESIGNED: CONCRETE AND MASONRY AND STEEL
•
SHANK LENGTH UNDER WASHER: 0.313 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
WASHER OUTSIDE DIAMETER: 0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
SHANK DIAMETER: 0.138 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SHANK LENGTH1.188 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
MATERIAL FOR WHICH DESIGNEDCONCRETE AND MASONRY AND STEEL
SPECIAL FEATURESWASHER THICKNESS IS 0.040 IN. MINIMUM AND 0.050 IN. MAXIMUM; PIN HARDNESS IS 48 RHC IN
SHANK LENGTH UNDER WASHER0.313 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
SHANK DIAMETER0.138 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
HEAD DIAMETER0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
STYLE DESIGNATORGUIDED OR POWDER ACTUATED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
7905-06000Interchangeable
interchangeable cross-reference
interchangeable
5315-00-823-8710Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395 TY3CL1STPCInterchangeable
interchangeable cross-reference
interchangeable
F395/8-011Interchangeable
interchangeable cross-reference
interchangeable
F395/8-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-P-395/8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-P-395/8?
FF-P-395/8 is a FF-P-395/8.
What parts can replace FF-P-395/8?
There are 11 known substitutes for FF-P-395/8: 7905-06000, 5315-00-823-8710, FF-P-395 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-P-395/8?
FF-P-395/8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-823-8712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-P-395/8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026