PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F395/8-005

F395/8-005 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,DRIVE,GUIDED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 1.500 INCHES NOMINAL IN, head_diameter: 0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN, overall_length: 1.500 INCHES NOMINAL IN, shank_diameter: 0.141 INCHES NOMINAL IN, style_designator: GUIDED OR POWDER ACTUATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-823-8713, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F395/8-005
NSN: 5315-00-823-8713
FSC: 5315
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length1.500 INCHES NOMINAL IN
head_diameter0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
overall_length1.500 INCHES NOMINAL IN
shank_diameter0.141 INCHES NOMINAL IN
style_designatorGUIDED OR POWDER ACTUATED
surface_treatmentZINC OVERALL
material_thickness0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
washer_outside_diameter0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
shank_length_under_washer0.375 INCHES NOMINAL IN
material_for_which_designedCONCRETE AND MASONRY AND STEEL
NSN5315-00-823-8713
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F395/8-005 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: GUIDED OR POWDER ACTUATED
•
SHANK DIAMETER: 0.141 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
•
SHANK LENGTH UNDER WASHER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.500 INCHES NOMINAL IN
WASHER OUTSIDE DIAMETER0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
STYLE DESIGNATORGUIDED OR POWDER ACTUATED
SHANK DIAMETER0.141 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
HEAD DIAMETER0.250 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN
SHANK LENGTH UNDER WASHER0.375 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
MATERIAL FOR WHICH DESIGNEDCONCRETE AND MASONRY AND STEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
7905-06000Interchangeable
interchangeable cross-reference
interchangeable
5315-00-823-8710Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395 TY3CL1STPCInterchangeable
interchangeable cross-reference
interchangeable
F395/8-011Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395/8-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F395/8-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F395/8-005?
F395/8-005 is a PIN,DRIVE,GUIDED.
What parts can replace F395/8-005?
There are 13 known substitutes for F395/8-005: 7905-06000, 5315-00-823-8710, FF-P-395 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F395/8-005?
F395/8-005 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-823-8713. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F395/8-005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026