PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-P-395 TY3CL1STPC
FF-P-395 TY3CL1STPC ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,DRIVE,GUIDED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 1.500 INCHES NOMINAL IN, head_diameter: 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, overall_length: 1.500 INCHES NOMINAL IN, shank_diameter: 0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN, special_features: WASHER THICKNESS IS 0.040 IN. MINIMUM AND 0.050 IN.

MAXIMUM; PIN HARDNESS IS 48 RHC IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-823-8710, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-P-395 TY3CL1STPC
NSN: 5315-00-823-8710
FSC: 5315
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length1.500 INCHES NOMINAL IN
head_diameter0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
overall_length1.500 INCHES NOMINAL IN
shank_diameter0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
special_featuresWASHER THICKNESS IS 0.040 IN. MINIMUM AND 0.050 IN. MAXIMUM; PIN HARDNESS IS 48 RHC IN
style_designatorGUIDED OR POWDER ACTUATED
surface_treatmentZINC OVERALL
material_thickness0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
washer_outside_diameter0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
shank_length_under_washer0.313 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
material_for_which_designedCONCRETE AND MASONRY AND STEEL
NSN5315-00-823-8710
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FF-P-395 TY3CL1STPC · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
MATERIAL FOR WHICH DESIGNED: CONCRETE
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
SHANK LENGTH UNDER WASHER: 0.312 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
SHANK LENGTH: 0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: GUIDED OR POWDER ACTUATED
•
WASHER OUTSIDE DIAMETER: 0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
MATERIAL FOR WHICH DESIGNEDCONCRETE
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
SHANK LENGTH UNDER WASHER0.312 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
SHANK LENGTH0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
HEAD DIAMETER0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
STYLE DESIGNATORGUIDED OR POWDER ACTUATED
WASHER OUTSIDE DIAMETER0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
SHANK DIAMETER0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
FF-P-395 TY3CL1STPCInterchangeable
interchangeable cross-reference
interchangeable
F395/8-011Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395/8-4Interchangeable
interchangeable cross-reference
interchangeable
5315-00-823-8712Interchangeable
interchangeable cross-reference
interchangeable
F395/8-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-P-395 TY3CL1STPC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-P-395 TY3CL1STPC?
FF-P-395 TY3CL1STPC is a PIN,DRIVE,GUIDED.
What parts can replace FF-P-395 TY3CL1STPC?
There are 15 known substitutes for FF-P-395 TY3CL1STPC: FF-P-395 TY3CL1STPC, F395/8-011, FF-P-395 and 12 more. Substitute compatibility should be verified for your specific system.
Is FF-P-395 TY3CL1STPC still available?
FF-P-395 TY3CL1STPC is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-P-395 TY3CL1STPC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026