PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-P-395 TY1
FF-P-395 TY1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,DRIVE,GUIDED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 1.500 INCHES NOMINAL IN, head_diameter: 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, shank_diameter: 0.142 INCHES NOMINAL IN, style_designator: GUIDED OR POWDER ACTUATED, surface_treatment: ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-823-8714, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-P-395 TY1
NSN: 5315-00-823-8714
FSC: 5315
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length1.500 INCHES NOMINAL IN
head_diameter0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
shank_diameter0.142 INCHES NOMINAL IN
style_designatorGUIDED OR POWDER ACTUATED
surface_treatmentZINC OVERALL
material_thickness0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
washer_outside_diameter0.375 INCHES NOMINAL IN
shank_length_under_washer0.375 INCHES NOMINAL IN
material_for_which_designedCONCRETE AND MASONRY
nondefinitive_spec/std_data1 TYPE
NSN5315-00-823-8714
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FF-P-395 TY1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
MATERIAL FOR WHICH DESIGNED: CONCRETE AND MASONRY AND STEEL
•
SHANK LENGTH UNDER WASHER: 0.312 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
STYLE DESIGNATOR: GUIDED OR POWDER ACTUATED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
WASHER OUTSIDE DIAMETER0.373 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
MATERIAL FOR WHICH DESIGNEDCONCRETE AND MASONRY AND STEEL
SHANK LENGTH UNDER WASHER0.312 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
HEAD DIAMETER0.235 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
STYLE DESIGNATORGUIDED OR POWDER ACTUATED
MATERIALSTEEL OVERALL
SHANK DIAMETER0.148 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
SHANK LENGTH1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
7905-06000Interchangeable
interchangeable cross-reference
interchangeable
5315-00-823-8710Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395Interchangeable
interchangeable cross-reference
interchangeable
FF-P-395 TY3CL1STPCInterchangeable
interchangeable cross-reference
interchangeable
F395/8-011Interchangeable
interchangeable cross-reference
interchangeable
F395/8-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-P-395 TY1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-P-395 TY1?
FF-P-395 TY1 is a PIN,DRIVE,GUIDED.
What parts can replace FF-P-395 TY1?
There are 13 known substitutes for FF-P-395 TY1: 7905-06000, 5315-00-823-8710, FF-P-395 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-P-395 TY1?
FF-P-395 TY1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-823-8714. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-P-395 TY1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026