PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-924 MIL-G-23652 TY 2
AS568-924 MIL-G-23652 TY 2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN, center_hole_diameter: 1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-172-7189, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-924 MIL-G-23652 TY 2
NSN: 5331-00-172-7189
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
center_hole_diameter1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5331-00-172-7189
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-924 MIL-G-23652 TY 2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
AS3208-24Interchangeable
interchangeable cross-reference
interchangeable
3-24 V747-75Interchangeable
interchangeable cross-reference
interchangeable
2306990 REV J IT NO 168Interchangeable
interchangeable cross-reference
interchangeable
E0540 3-924Interchangeable
interchangeable cross-reference
interchangeable
AS568-924Interchangeable
interchangeable cross-reference
interchangeable
D2000 2AA815A13F17EA14Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-924 MIL-G-23652 TY 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-924 MIL-G-23652 TY 2?
AS568-924 MIL-G-23652 TY 2 is a O-RING.
What parts can replace AS568-924 MIL-G-23652 TY 2?
There are 30 known substitutes for AS568-924 MIL-G-23652 TY 2: AS3208-24, 3-24 V747-75, 2306990 REV J IT NO 168 and 27 more. Substitute compatibility should be verified for your specific system.
Is AS568-924 MIL-G-23652 TY 2 still available?
AS568-924 MIL-G-23652 TY 2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-924 MIL-G-23652 TY 2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026