PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-924
AS568-924 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, center_hole_diameter: 1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1978, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-924
NSN: 5331-00-165-1978
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
center_hole_diameter1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5331-00-165-1978
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-924 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
OUTSIDE DIAMETER: 1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.706 INCHES MINIMUM AND 1.734 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
D-42042 PIECE 6Interchangeable
interchangeable cross-reference
interchangeable
AS568-924Interchangeable
interchangeable cross-reference
interchangeable
AS568-924MIL-G- 23652 TYPE 2Interchangeable
interchangeable cross-reference
interchangeable
000-605-1024Interchangeable
interchangeable cross-reference
interchangeable
D65186 AND R52998Interchangeable
interchangeable cross-reference
interchangeable
9100C2008Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-924?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-924?
AS568-924 is a O-RING.
What parts can replace AS568-924?
There are 31 known substitutes for AS568-924: D-42042 PIECE 6, AS568-924, AS568-924MIL-G- 23652 TYPE 2 and 28 more. Substitute compatibility should be verified for your specific system.
Is AS568-924 still available?
AS568-924 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-924

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026