PartsTable
Technical Data Sheet
PartsTable / O-RING / D2000 2AA815A13F17EA14
D2000 2AA815A13F17EA14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN, center_hole_diameter: 1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-456-2532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D2000 2AA815A13F17EA14
NSN: 5331-00-456-2532
FSC: 5331 — O-RING
CAGE: 81346 — AMERICAN SOCIETY FOR TESTING AND MATERIALS DBA ASTM INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
outside_diameter1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
center_hole_diameter1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5331-00-456-2532
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D2000 2AA815A13F17EA14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.710 INCHES MINIMUM AND 1.730 INCHES MAXIMUM IN
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER1.934 INCHES MINIMUM AND 1.978 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
AS3208-24Interchangeable
interchangeable cross-reference
interchangeable
3-24 V747-75Interchangeable
interchangeable cross-reference
interchangeable
2306990 REV J IT NO 168Interchangeable
interchangeable cross-reference
interchangeable
D-42042 PIECE 6Interchangeable
interchangeable cross-reference
interchangeable
AS568-924Interchangeable
interchangeable cross-reference
interchangeable
AS568-924MIL-G- 23652 TYPE 2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D2000 2AA815A13F17EA14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D2000 2AA815A13F17EA14?
D2000 2AA815A13F17EA14 is a O-RING.
What parts can replace D2000 2AA815A13F17EA14?
There are 23 known substitutes for D2000 2AA815A13F17EA14: AS3208-24, 3-24 V747-75, 2306990 REV J IT NO 168 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D2000 2AA815A13F17EA14?
D2000 2AA815A13F17EA14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-456-2532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D2000 2AA815A13F17EA14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026