PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS21919WDG24
AS21919WDG24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-3045, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS21919WDG24
NSN: 5340-00-200-3045
FSC: 5340
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHION
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
nondefinitive_spec/std_data4 TYPE AND A CLASS
specification/standard_data26512-GS14 MANUFACTURERS SPECIFICATION
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
NSN5340-00-200-3045
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS21919WDG24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 26512-GS14 MANUFACTURERS SPECIFICATION
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
STYLE DESIGNATOR: OFFSET MOUNT
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND A CLASS
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA26512-GS14 MANUFACTURERS SPECIFICATION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
STYLE DESIGNATOROFFSET MOUNT
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA4 TYPE AND A CLASS
STYLE DESIGNATOROFFSET MOUNT
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
LOOP INSIDE DIAMETER1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.234 INCHES MINIMUM AND 1.264 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS21919WDG24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS21919WDG24?
AS21919WDG24 is a CLAMP,LOOP.
What parts can replace AS21919WDG24?
There are 27 known substitutes for AS21919WDG24: MILC8603, 99122, MS21919G8 and 24 more. Substitute compatibility should be verified for your specific system.
Is AS21919WDG24 still available?
AS21919WDG24 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS21919WDG24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026