PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN510-416-12
AN510-416-12 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.462 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.750 INCHES NOMINAL IN, fastener_length: 0.750 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-271-8731, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN510-416-12
NSN: 5305-00-271-8731
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.462 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 85.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-271-8731
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN510-416-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 85.0 DEGREES MAXIMUM
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD DIAMETER: 0.462 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 85.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLESLOT
HEAD DIAMETER0.462 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.250 INCHES IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
HEAD STYLEFLAT COUNTERSUNK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
FFS92ANDTYPE1ANDSTYLE2Interchangeable
interchangeable cross-reference
interchangeable
AN505-3-5Interchangeable
interchangeable cross-reference
interchangeable
AN505-3-4Interchangeable
interchangeable cross-reference
interchangeable
8051Interchangeable
interchangeable cross-reference
interchangeable
AN510DD6-24Interchangeable
interchangeable cross-reference
interchangeable
AN510C10-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN510-416-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN510-416-12?
AN510-416-12 is a SCREW,MACHINE.
What parts can replace AN510-416-12?
There are 13 known substitutes for AN510-416-12: FFS92ANDTYPE1ANDSTYLE2, AN505-3-5, AN505-3-4 and 10 more. Substitute compatibility should be verified for your specific system.
Is AN510-416-12 still available?
AN510-416-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN510-416-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026